USAGE
KONTİNÜ :
Use between 10-12 gr/lt
and it is recommended to be applied at 70-75 ºC. The amount to be used should be divided in half and applied in two separate
more efficient results are obtained if applied in the bathroom.
PULLING :
It is recommended to use between 0.5-1.0 gr/lt and to apply at 70 or 75ºC.
More efficient results are obtained if the amount to be used is divided in half and applied twice.
After reactive dyeing and printing, it is recommended that the dye that cannot react with cellulose hydroxyl is reactive.
group reacts with the hydroxyl group of water and incorporates as many hydroxyls as the number of reactive groups.
These hydroxyl groups hydrogen bridge with the hydroxyl groups of cellulose,
They prefer to remain adherent to cellulose. On the other hand, Ca, Mg, Si, Al, which are naturally present in cellulose
The cations also bind with the sulfonate groups in the dye and prevent the dye from being removed from the cellulose.
In addition, hardening agents in the water (which come from the water, salt used, chemicals)
inhibit the separation of the dye from the cellulose.
Electrolytes, i.e. all water-soluble salts, promote the migration from water to cellulose by reducing the solubility of the dye,
which makes washing difficult. EGA SED CLEAN eliminates all these negative factors and saves a lot of effort and expense.
ensures that the dyeing process is finished with a safe and uniform wash.